Electromechanical Assembly
Installation of equipment, pipelines, panels and auxiliary systems under quality and industrial safety standards.
Electromechanical engineering, installation and commissioning for industrial plants and expansion projects in Mexico, with safety, traceability and technical compliance.
The difference between an IE2 and IE3 motor in the 75-250 kW range represents a real saving of 3-8% in annual consumption. Without circuit metering or load curve analysis, plants make replacement decisions without evidence and lose the argument to the investment committee.
A process pump engine without configurationSevensee can stop the entire plant. Without available or verified supplier of spare parts, the stoppage far exceeds the cost of any preventive or strategic maintenance plan.
Couplings, bearings and mechanical seals are frequently specified outside the electrical scope in EPC projects, generating interfaces that are resolved in the field with unengineered solutions that compromise long-term reliability.
We integrate end-to-end electromechanical solutions to accelerate start-up, reduce operation risks and improve reliability.
Installation of equipment, pipelines, panels and auxiliary systems under quality and industrial safety standards.
FAT/SAT tests, loop checks and verification protocols to ensure performance from startup.
Controlled commissioning, technical documentation and operational transfer to plant equipment.
EPC execution with quality control in the field, operational windows and document delivery for plant continuity.
References for assembly, integration and commissioning in highly demanding electrical infrastructure.
Electromechanical integration for generation and synchronization system.
400 kV power cable systems for hydroelectric turbines, with execution in critical environment.
Increase in capacity with operational continuity in the plant.
Includes engineering, technical supply, assembly, testing and commissioning to leave the system operating safely.
Yes. We plan intervention windows and execution phases to minimize operational continuity impacts.
Yes. Rewinded to 5,000 V with certified dynamic balancing, high voltage dielectric tests and engine quality certificate. We deliver test protocol with measured values.
Yes. We have access to TEFC, Ex-d, Ex-e, variable speed and fuel-supplies engines from brands like WEG, SEW-Euro DEST, Siemens and ABB, with source certifications.
Yeah. We performed vibration measurement in the 2016s with ultrasound equipment and infrared thermography to validate the installation before the final delivery.
We have experience with ABB, Danfoss, Allen-Bradley, Siemens and Schneider. We perform complete parameter migration with vacuum test and loaded before the move to production.
Engines up to 100 HP: 48-72 hours under normal conditions. Higher power engines: according to diagnosis and inventory of supplies. We maintain stock of rewinding materials for competitive response times.
Yes. We design preventive maintenance programs with inspection routes, periodic vibration analysis and semi-annual termography to maintain the reliability of the fleet.
Share your requirement in the contact form and we define scope, times and technical proposal.
Filter by category and quickly find the right service for your project.
We did not find services with these filters. Try another category or keyword.
Electromechanical assembly does not end at the raceway — it ends with the correct cable, sized, labeled and certified per coil. Incorrectly specifying the cable that goes inside the tray is like laying the tray backwards: it looks fine until the computer does not start. We supply the three KEI / Helukabel families that cover the plant electrical network integrated into the EPC scope.
LV and MV power cable for powering main boards, MCCs, load centers and motor control centers. Selection of gauges per connected load, utilization factor and voltage drop limit. NOM-001-SEDE compliance.
Construction selection by physical route: cable with armor for direct burial, without armor for inner tray, with HDPE jacket for chemically aggressive soils. Application of correction factors for grouping, temperature and laying method.
Mandatory shielded EMC cable for powering drive-controlled motors (VFD). The display prevents the drive's PWM switching from injecting interference into the control network and degrading the motor bearings from shaft currents.
| Method | Recommended construction | Cover |
|---|---|---|
| Interior tray | No armor | PVC/LSZH |
| Interior metal duct | No armor | PVC |
| Direct buried | With steel armor | HDPE/PE |
| Buried pipeline | Without armor or armor | PVC/HDPE |
| Chemically aggressive flooring | With armor | HDPE reinforcement |
The final selection also adjusts for ambient temperature, cable grouping in the route, and project voltage drop limit.
We specify gauges and constructions by physical route, we supply coordinated with the progress of pipelines, we execute laying and splicing with our own crews and we deliver traceable documentation by reel. A single technical responsibility from the tray to the engine.
Let's talk about scope, times and criticalities to send you a technical route. We will contact you in less than 24 business hours; The proposal time depends on the scope.
Cotemar — Hercules Ship
Port of Veracruz
Specialised maintenance service for the electric motor of the Bow Thruster No. 3, Hyundai brand, 1 050 kW, 690 VCA and 883 ~.
Cotemar — Atlas Vessel
Port of Veracruz
Specialized maintenance to the two 1,050 kW Hyundai brand Bow Thruster electric motors, and the four main generators—brushless self-excited synchronous, 590 kW, 2,000 A and 440 V—, in addition to the four Leroy Somer generators serviced in 2020.
Cotemar — Olimpo Ship
Port of Veracruz
Specialized maintenance to the two 1,050 kW, 690 VAC, 883 rpm Hyundai brand Bow Thruster electric motors, and the four 590 kW self-excited synchronous main generators.
Cotemar — Saturno Ship
Port of Veracruz
Specialised maintenance service for the two main tail generators — self-excited slurry without brooms, Stamford brand, 1 280 kW, 2 000 A, 440 V and 1 800 MM.
Saipem
Tabasco
Supply, installation and testing of 4.16 kV relief cones.
CH Angostura
Chiapas
Inspection, modernization and maintenance service greater than four bridge cranes with capacity of 250 tons.
ZAAP-C Platform — Pemex
Campeche (offshore)
AMClyDE 5500 general inspection and maintenance service.
MALOOB-C Platform — Pemex
Campeche (offshore)
Electromechanical work on the deck, with power cables and fiber optics.
CEMEX
Mexico
VMS Energy customer in the cement industry.