Control Architecture
PLC/SCADA architecture, control philosophy and integration with existing systems.
Engineering, integration and commissioning of PLC, SCADA, DCS, instrumentation and OT networks to improve availability, traceability and process safety.
Lines with Allen-Bradley PLC, Siemens S7 and Emerson DCS coexist without data exchange between control islands. Integration via gateway or migration implies a rigorous FAT/SAT that no generalist provider can guarantee without multi-brand experience.
Updating a PLC program or a DCS control block in an operating plant requires a validated rollback plan, a minimum intervention window and functional testing of each interlock before moving to production. An omission can result in an unscheduled stop or accident.
Woodward 505, 2301D and MicroNet continue to operate in hundreds of Mexican plants without internal staff to master fine-tuning PID loops, load-speed rule and critical alarm diagnosis. Each instability event is an unexpected risk of shooting.
We integrate end-to-end automation and control solutions to increase operational availability, traceability and process security.
PLC/SCADA architecture, control philosophy and integration with existing systems.
Integration of signals, instrumentation loops and industrial communications for stable control.
Functional testing, tuning, sequence validation and documented operational delivery.
OT engineering and execution with functional validation, staged testing and safe start-up of operation.
Experience in control modernization, OT integration and operational continuity in critical assets.
Control integration for synchrony, supervision and stable operation.
400 kV power cable systems for hydroelectric turbines, with execution in critical environment.
Increase in capacity with operational continuity in the plant.
Includes control engineering, PLC/SCADA integration, instrumentation, testing and commissioning.
Yes. We plan intervention windows and execution phases to minimize operational continuity impacts.
Allen-Bradley (ControlLogix, CompactLogix), Siemens S7-300/400/1500, Schneider Modicon, ABB 800xA, Emerson DeltaV and Yokogawa CENTUM. We integrate any combination with gateway or native migration.
Yes. We have experience in Woodward 505, 2301D, MicroNet and Proact, including fine-tuning of load-speed governance, frequency loop tuning and diagnostic of alarms in operation.
Modbus TCP/RTU, DNP3, Profibus DP, Profinet, EtherNet/IP, IEC 61850 and OPC-UA. We deliver the documented point-to-point mapping and communication tests in FAT.
We design modular architectures with available expansion I/O and growth-ready communication. In many cases we expand the existing system without replacing the main processor.
We apply documented MOC, we simulate the change in a test environment, we execute FAT in the plant and the move to production is done in a scheduled window with validated rollback and personnel on site.
Yes. We migrated from obsolete PLC to current platforms preserving the logic of controlled, with documented program conversion and parallel commissioning before the final cut.
Share your requirement in the contact form and we define scope, times and technical proposal.
Filter by category and quickly find the right service for your project.
We did not find services with these filters. Try another category or keyword.
In automation the cable is the nervous network: every analog signal, every fieldbus, every control loop depends on the correct construction. One misspecified display or untwisted pair and the control network becomes unpredictable. We supply the four KEI / Helukabel families to cover the complete control network, integrated into the EPC scope.
Shielded cables for 4–20 mA signals, RTD/Pt100 thermometers, HART transmitters and process signals. Twisted pairs with individual and global shielding, low capacitance to preserve signal integrity over long loops.
Specialized cables for Profibus PA/DP, Profinet, Modbus, EtherCAT and industrial Ethernet. Bus-specific constructions — controlled impedance, standard twisted pair, and protocol-compliant shielding.
Shielded cable for power supply and signals from drives (VFD). Copper shield that channels common mode currents generated by PWM switching and prevents interference in the shared control network.
Low Smoke Zero Halogen cables for control rooms, electrical rooms, PLC/SCADA racks and cable tunnels. Low smoke, no toxic halogen gases — protects equipment and personnel in confined spaces with high wiring density.
| Signal type | Construction | Screen |
|---|---|---|
| Analog 4–20 mA | Twisted pair | Individual + global |
| RTD/Pt100 (3-wire) | Triad braided | Global screen |
| Profibus PA/DP | Type A twisted pair | Foil + braid |
| Profinet/Ethernet ind. | 2 or 4 pairs | SF/UTP or S/FTP |
| Motor power supply + VFD | 3 or 4 conductors | Mandatory EMC screen |
| Multi-conductor control | Numbered cores | Optional depending on environment |
The DIN 47100 instrumentation color code is the most used convention for traceability on lines with hundreds of pairs.
We specify the control cable network coordinated with the PLC/SCADA architecture, manage the supply by project milestones and deliver traceable documentation per reel. We test continuity and insulation before powering up — with a single technical responsibility from sensor to display.
When a plant combines grid, generators, UPS, BESS or solar, someone has to decide in real time which source powers which load. We specify, program and integrate energy and power management systems with platforms from DEIF, Woodward and Schneider Electric, depending on the scale and existing infrastructure.
Automatic start and stop of groups, synchronization between machines and with the network, active and reactive load distribution, N+1 redundancy.
Priority disconnection due to lack of capacity, low frequency or loss of a source, with staggered reconnection.
Peak shaving, off-peak consumption shift and zero injection control into the grid.
Communication through industrial protocols, alarms and event registration for analysis of each transfer or trip.
Applicable experience: load segregation system of the Akal-J process center (Diavaz), load sharing of five Wärtsilä motor generators at the P.S.S. Chemul and integrated automatic transfers to SCADA in Nohoch-A2. See how it fits into the Electrical Availability Architecture.
Modern automation requires field teams to talk to each other. VMS Energy supplies and integrates protocol gateways, instrumentation sensors and SCADA systems to connect your plant to a real-time monitoring and analytics platform.
Conversion between protocols: Modbus RTU/TCP, Profibus, PROFINET, EtherNet/IP, BACnet, MQTT. They allow legacy equipment to be integrated with modern systems without replacing field hardware.
Active and passive magnetic sensors for measuring rotation speed and position in turbines and engines. Digital tachometers for continuous RPM monitoring.
| M180 | Sensor active, high signal at low RPM |
| M108 / M231 / M928 | Passive sensors for gas and steam turbines |
| SPD-100 | Digital gauge with display and output 4-20 mA |
Design, programming and integration of SCADA systems for supervision, control and data acquisition in real time. Remote monitoring, alarms, variable history and automatic reports.
Building Management Systems for integrated control of HVAC, lighting, access and energy systems in industrial facilities, hospitals and data centers.
We designed the connectivity architecture and provided you with a dashboard of process KPIs from the first month.
We define architecture, scope and implementation plan to issue a technical proposal. We will contact you in less than 24 business hours; The proposal time depends on the scope.
Pemex G.T.D.H.
Marine Gas Distribution Center, Ciudad Pemex, Tabasco
Construction of the control board and development of the monitoring and control application for the measurement of wet sour gas skids.
DEMAR — Nohoch Alfa Complex
Campeche (offshore)
Surveys on the Triconex brand emergency stop system and preparation of the update proposal.
Cotemar — AK-C1 Platform
Akal-C, Campeche (offshore)
Surveys and backups of the instrumentation integrated into the platform's control and monitoring system, for its dismantling.
Pemex — KU-H Platform
Campeche (offshore)
Configuration and commissioning of the Rockwell Allen Bradley PLC-based control system for the TAB1290A and TAB1290B screw type pumps.
Diavaz — AK-J1, AK-J2 and AK-J3 platforms
Campeche (offshore)
Provision of specialized engineering services for the implementation of the load segregation system at the Akal-J process centre.
Cotemar — Abkatún-A Platform
Campeche (offshore)
Integration of signals to the Praxis monitoring and control system.
Infrastructure project
State of Mexico
Integration and commissioning of twelve NEMA 12 cabinets with Siemens drives and Profinet control via SCADA, for ventilation and extraction jetfans within a tunnel.
Zucarmex
Mexico
VMS Energy customer in the sugar industry.
International Flavors & Fragrances
Mexico
VMS Energy customer in the ingredients and flavors industry.